| Epoxy Floor thin smear Paint features : stylish, simple in construction and more wear-resistant, can not afford to dust, is easily washed. Scope : underground garage, warehouse, general access to the occasion Ping painting. Technical indicators : life (25 ¡ã C) : 40 minutes drying time (25 ¡ã C) : Table dry : a solid hour : completely dry 12 hours : 7 days hardness : 3H wearability : ¡Ü .02 use : 1. pre-construction requests to the company confirmed the construction process. Two forbidden mixed paint, water and other foreign bodies, must strictly follow the required ratio joined curing agent. 3, grassroots addressed : the grassroots to remove loose surface Zhi ash, sand, oil, water and other fixtures. then polished handle. 4, A component may be a small amount of stratification, construction Component A first preliminary Stir prorated after B-A component of the composition, then the full three minutes to stir coating uniformity, temperature greater than 30 ¡ã C, According to the company should reduce demand appropriate mixing time (recommended to switch to blenders, such as mixing with ordinary tools. Mixing time should be extended as far as possible and speed up the stirring speed). Use of the product should be used is now allocated, the amount allocated amount spent during the use, in order to avoid wasting gel. When used to be an increase of 15% - 20% thinner, the company must use special thinner, Otherwise not bear quality, the use of the designated drum avoid Picking. 5, smeared Moisture more than 8%, painting places in the surface temperature to 5 ¡ã C to 35 ¡ã C or above. the relative humidity greater than 80%, stop construction. 6, the coating should be clean places clean, well-ventilated, such as bad ventilation equipment need to open mandatory ventilation and forbid pyrotechnics. 7, construction completed 24 hours after use (25 ¡ã C) (only in running above) 8. Film curing time for seven days (25 ¡ã C) (which can be used normally), 7 days forbidden fall Chibu liquidation. 9, pre-construction coating temperature should be maintained at 20 ¡æ. 10 production after the completion of 48 hours of maturation use. Transport and storage : a general transport of dangerous goods, should be preserved in the absence of direct sunlight, cool ventilation, avoid contact with the fire, avoid below 10 ¡ã C or 30 ¡ã C higher than that under the conditions of storage, the products from the production date, shelf-life of six months. |
|
User
login
