| Epoxy Floor Paint self-leveling feature : mirror like appearance, good visual effects, solvent-free systems, environmentally friendly, dust can not apply to purify regional, affordable middle-load, lasting life. Scope : purification plants, medicinal plants, electronic factories, machinery plants, food plants, laboratory requirements clean edge to the occasion Ping painting. Technical indicators : life (25 ¡ã C) : 25 minutes drying time (25 ¡ã C) : Table stem : six hours of solid work : completely dry 24 hours : 7 days hardness : 4H wearability : ¡Ü .02 use : 1. Before construction company to confirm construction, technology will be used at designated tool. Two forbidden mixed paint, water and other foreign bodies, must strictly follow the required ratio joined curing agent. 3, grassroots addressed : the grassroots to remove loose surface Zhi ash, sand, oil, water and other fixtures. then polished handle. 4, A component may be a small amount of stratification, construction Component A first preliminary Stir prorated after B-A component of the composition, then the full three minutes to stir coating uniformity, temperature greater than 30 ¡ã C, According to the company should reduce demand appropriate mixing time (recommended to switch to blenders, such as mixing with ordinary tools. Mixing time should be extended as far as possible and speed up the stirring speed). Use of the product should be used is now allocated, the amount allocated amount spent during the use, in order to avoid wasting gel. 5, smeared Moisture more than 8%, painting places in the surface temperature to 5 ¡ã C to 35 ¡ã C or above. the relative humidity greater than 80%, stop construction. 6, the coating should be clean places clean, well-ventilated, such as bad ventilation equipment need to open mandatory ventilation and forbid pyrotechnics. 7, construction completed 24 hours after use (25 ¡ã C) (only in running above) 8. Film curing time for seven days (25 ¡ã C) (which can be used normally), 7 days forbidden fall Chibu liquidation. 9, pre-construction coating temperature should be maintained at 20 ¡æ. 10 production after the completion of 48 hours of maturation use. Transport and storage : a general transport of dangerous goods, should be preserved in the absence of direct sunlight, cool ventilation, avoid contact with the fire, avoid below 10 ¡ã C or 30 ¡ã C higher than that under the conditions of storage, the products from the production date, shelf-life of six months. |
|
User
login
