"Lunan sign upscale paint
Today is
 
    User login
User name:
Password:
Register  Forget password?
      Prouduct list
Blending alkyd paint
Alkyd anti-rust paint
Alkyd enamel
Amino drying paint
Nitro paint
Paint colors hammer
Acrylic Paint
Thermostable paint
Polyurethane paint
Epoxy paint
Chlorinated rubber paint
Chlorine polyethylene paint
High chloride paint
Speecial Paint category
In outer wall latex paint
Powder Coatings
Paint diluent
    Product Show
 Polyurethane paint >> Ordinary polyurethane paint >> Polyurethane magnetic paint
 
    
Number:
S04-2
Name:
Polyurethane magnetic paint
Spec:
18+6
Memo:
Polyurethane magnetic paint
Class:
Polyurethane paint
 
    Product Readme
Polyurethane magnetic paint
1.Composed:Hydroxy alcohol acid resin,be able to bear await pigment,solvent,assistant,curing agent.
2.Characteristic:The lacquer film color is gorgeous,liberality is bright,fine guarantees to glorify nature,hardness high.
3.Use:Apply to wooden appliance furniture and do decoration protection role indoor metal surface.
4.Technology requirements :HG/T2660-95
 project  Indicators
 Colour  Accord with standard model , lacquer film levelling glossy.
 Nonvolatile matter % >=   55
 Fineness  um <=  20
 Covering power g/m2  Black<=40 ,White<=120 ,Red,yellow<=40 ,Blue,green<=120
 Drying time ,h  Outside dry<=4,True try<=24,Bake trying(120+-20C) 1
 Lustre  >=  90
 Pliable and tough mm <=   3
 Adhesion (draw circle law) <= 2
 Hardness >=  0.5
 Fastness to water ,24h  Not foam¡¢not corrugate¡¢no peel off,allowing turn white,in 2h recover
5.Reference
1).Be sure clean the surface,eliminates greasy dirt,rust,oxide skin etc.
2).If the lacquer has foreign substance,must filter.
3).Brush,air spray.Use x-10 polyurethanes diluent,don¡¯t use alcohol kind,ammonia kind menstruum and sparse nitro group Buddhism agent.
4).Before use,fit two sets according to the required proportion,don¡¯t mingle too much once a time ,use up them in 4 hours(23+-20C) in order to avoid gelling.
5).While air humidity greater than 85% or the bottom material's temperature is lower than dew point time 30C had better not construction.
6).This lacquer can dry in homoiothermy,or bake 1h under 1200C+-20C condition.
7).That second component,be obliged to appropriate storage,container seal off tight,guard against that lacquer, avoid seepage and leakage, makes lacquer gelling go bad.
6.Transport,storage
  When transporting,Prevent from rain,Prevent Sunlight suns violently,Avoid collision,should according to the traffic regulations. 
  Storage in the cool ventilation,dry place,prevent sunlight from irradiating directly,Isolated fire source,far away from a heat source.
7.Safety protects
Space has fine ventilation facilities,the staff wear glasses,glove,gauze mask,avoid skin contacting and sucking lacquer fog in. The scene strictly forbids fireworks.
Remark:Brochures is our experiment and the experieme accumulation,also as construction reference.with the product quality ceaseless improve,the relative index will change,so we can not notify to you on time.
Hits:338  UpdateTime:2007-11-25  Print   Close
Home About us Product list Product class Honor Market Feedback User center
Copyright 2007-2010 www.Paint5.com All Rights Reserved Tel:0539-2220117,(86)18953952255 Email:tuliao#189.cn(#replaced@)
Add:Gaoqiao Industrial Zone,Yishui Country,Shandong Province,P,R,China Postcode:276400
QQ:23182234lunan paintQQ:289022711lunan paint