"Lunan sign upscale paint
Today is
 
    User login
User name:
Password:
Register  Forget password?
      Prouduct list
Blending alkyd paint
Alkyd anti-rust paint
Alkyd enamel
Amino drying paint
Nitro paint
Paint colors hammer
Acrylic Paint
Thermostable paint
Polyurethane paint
Epoxy paint
Chlorinated rubber paint
Chlorine polyethylene paint
High chloride paint
Speecial Paint category
In outer wall latex paint
Powder Coatings
Paint diluent
    Product Show
 Epoxy paint >> Epoxy anticorrosion primer >> Epoxy zinc anticorrosive primer
 
    
Number:
LN-hyfx
Name:
Epoxy zinc anticorrosive primer
Spec:
25+2.5
Memo:
Epoxy zinc anticorrosive primer
Class:
Epoxy paint
 
    Product Readme
Epoxy zinc anticorrosive primer
1.Composed:Epoxy resin,zinc powder,solvent and amine curing agent primer.
2.Characteristic:Preservative function of that lacquer is outstanding,adhesion is strong,zinc powder contents are high in lacquer film,the water-proof function is outstanding.
3.Use:Do supporting priming paint highly valuing preservative coating,be used for boat and ship,port facilities,bridge, steel structure,oil drilling platform and chemical industry equipment etc.
4.Technology requirements: HG/T3668ĄȘ2000
 project  Indicators
 Colour and outward appearance  Gray,hue are indeterminate,the lacquer film levels.
 Viscosity  S >=  20
 Drying time h <=  Outside dry 1 ,True dry 24
 Impact strength kg.cm >=  50
 Pliable and tough  mm  1
 Fastness to saltwater  72h  Pass
5.Reference
1).The thing's surface which is scribbled must be without oxide skin,rust,greasy dirt etc.
2).Bottom material's temperature must overtop dew point 30C,when the bottom material's temperature is lower than 50C, the lacquer film is solidified, therefore,it's inadvisable to use.
3).A group share must stir homogeneously after openning,and then pour second set into a group share under mixing according to matching ratio,drift along dividing evenly,be placed quietly, sufficiently,curing and add the appropriate amount diluent after 30mins,Tune extremely Viscosity being under construction.
4).The paint should runs out within 6 hours after commixure.
5).The brush scribbles,the air flame plating,rolling spread may be equal.
6).it must stir unceasingly in order to avoid depositing in process.
7).Re-brush interval time:
Bottom material temperature  5-10  15-20  25-30
 The shortest interval h  48  24  12
8).Film thickness(Recommend ): 60-80um.
6.Transport,storage
  When transporting,Prevent from rain,Prevent Sunlight suns violently,Avoid collision,should according to the traffic regulations. 
  Storage in the cool ventilation,dry place,prevent sunlight from irradiating directly,Isolated fire source,far away from a heat source.
7.Safety protects
Space has fine ventilation facilities,the staff wear glasses,glove,gauze mask,avoid skin contacting and sucking lacquer fog in. The scene strictly forbids fireworks.
Remark:Brochures is our experiment and the experieme accumulation,also as construction reference.with the product quality ceaseless improve,the relative index will change,so we can not notify to you on time.
Hits:659  UpdateTime:2007-11-25  Print   Close
Home About us Product list Product class Honor Market Feedback User center
Copyright 2007-2010 www.Paint5.com All Rights Reserved Tel:0539-2220117,(86)18953952255 Email:tuliao#189.cn(#replaced@)
Add:Gaoqiao Industrial Zone,Yishui Country,Shandong Province,P,R,China Postcode:276400
QQ:23182234lunan paintQQ:289022711lunan paint