"Lunan sign upscale paint
Today is
 
    User login
User name:
Password:
Register  Forget password?
      Prouduct list
Blending alkyd paint
Alkyd anti-rust paint
Alkyd enamel
Amino drying paint
Nitro paint
Paint colors hammer
Acrylic Paint
Thermostable paint
Polyurethane paint
Epoxy paint
Chlorinated rubber paint
Chlorine polyethylene paint
High chloride paint
Speecial Paint category
In outer wall latex paint
Powder Coatings
Paint diluent
    Product Show
 Chlorine polyethylene paint >> Chlorine polyethylene anticorrosion topcoat
 
    
Number:
LN-lhh
Name:
Chlorine polyethylene anticorrosion topcoat
Spec:
20
Memo:
Chlorine polyethylene anticorrosion topcoat
Class:
Chlorine polyethylene paint
 
    Product Readme
Chlorine polyethylene anticorrosion topcoat
1.Composed:Chlorine polyethylene,pigment,assistant.
2.Characteristic:The lacquer film has fine adhesion to iron and steel,have good water and corrovity resistance.
3.Use:Apply to hoard the jar,bridge,electric power plant etc.,steel structure and cement outside,as lacquer shield prevent corrosion.
4.Technology requirements :HG/T2661-95
 project  Indicators
 State in vessel  No lump,assume homogeneous state.
 Viscosity S >=  60
 Fineness um <=  55
 Solid contents % >=  23

Covering power  g/m2  <=

 Nature blue 160  Middle green 110
 Middle gray 110 White 210
 Colour and outward appearance  Accord with standard model , lacquer film levelling glossy.
 Drying time h<=  Outside dry 0.5 True dry 24
 Adhesion (framing) level  0
 Pliable and tough  mm  1
 Impact strength ,cm  50
 Reserve a stability,500C 15d  Scttlement degree 6 Viscosity is changed 2
 Apply to scheduled time ,h  8
 Compound coating
30%H2SO4aqueous solution 30d
30%NA2OH3aqueous solution 30d
30%NAClaqueous solution 30d
 

Not foam¡¢not falling¡¢not getting rusty

5.Reference
1).The front lacquer must keep clean.
2).The air flame plating,the brush spread construction or roll spread.
3).Use supporting diluent to adjust the viscosity being under construction.
4).Recommend dry film thickness: 60-80 um.
5).Re-brush interval time£º
 Bottom material temperature  5  20  30
 The shortest interval h  12  8  6
6.Transport,storage
When transporting,Prevent from rain,Prevent Sunlight suns violently,Avoid collision,should according to the traffic regulations.
Storage in the cool ventilation,dry place,prevent sunlight from irradiating directly,Isolated fire source,far away from a heat source.
7.Safety protects
Space has fine ventilation facilities,the staff wear glasses,glove,gauze mask,avoid skin contacting and sucking lacquer fog in. The scene strictly forbids fireworks.

Remark:Brochures is our experiment and the experieme accumulation,also as construction reference.with the product quality ceaseless improve,the relative index will change,so we can not notify to you on time.

Hits:581  UpdateTime:2009-5-9  Print   Close
Home About us Product list Product class Honor Market Feedback User center
Copyright 2007-2010 www.Paint5.com All Rights Reserved Tel:0539-2220117,(86)18953952255 Email:tuliao#189.cn(#replaced@)
Add:Gaoqiao Industrial Zone,Yishui Country,Shandong Province,P,R,China Postcode:276400
QQ:23182234lunan paintQQ:289022711lunan paint