High chloride polyethylene topcoat
1.Composed:High chloride polyethylene resin,alcohol acid Resin,elasticizer,pigmenta and organic solvent.
2.Characteristic:Have good tide and corrosivity resistance.
3.Use: Used for chemical industry equipment,machinery,pipeline may guard against sour alkali and other chemicals corrosity.
4.Technology requirements :Q/ZLNQ032-2005
| project |
Indicators |
| Colour and outward appearance |
Accord with standard model |
| Viscosity S>= |
60 |
| Fineness um <= |
35 |
|
Solid contents % >= |
40 |
| Drying time h |
Outside dry 0.5 True try 24 |
| Pliable and tough mm<= |
2 |
| Impact strength kg.cm |
30 | 5.Reference
1).The primary lacquer of the object should have no greasy dirt,water share,dust etc.,adopt the air flame plating to follow construction much,suggest that the flame plating 3-4 times. the film is not lower than 80 um.
2).Use special dilent when dilute,when the humidity higher than 70% avoid construction.
3).Supporting request: Suggest process 3-4 layers anti-corrosive lacquer above the high chlorinating polyethylene antisepsis.
6.Transport,storage
When transporting,Prevent from rain,Prevent Sunlight suns violently,Avoid collision,should according to the traffic regulations.
Storage in the cool ventilation,dry place,prevent sunlight from irradiating directly,Isolated fire source,far away from a heat source.
7.Safety protects
Space has fine ventilation facilities,the staff wear glasses,glove,gauze mask,avoid skin contacting and sucking lacquer fog in. The scene strictly forbids fireworks.
Remark:Brochures is our experiment and the experieme accumulation,also as construction reference.with the product quality ceaseless improve,the relative index will change,so we can not notify to you on time. |
|
User
login
